Land Rover Discovery: Roof Sheet Metal
Repairs Roof
Rear Panel (G1770883)
READ NEXT:
Removal
NOTE:
The roof rear panel is installed in conjunction with:
Headliner
Roof moulding
Side air curtain module
Glass roof panel
Liftgate
The roof rear panel is serviced as indicated.
Installation
NOTE:
BSF installation involves using the Land Rover approved BSF
installation tool and requires a hole diameter of 6.5mm.
Dress flanges where necessary.
Clean and prepare the pa
REMOVAL
NOTE:
The roof rear header panel is installed in conjunction with:
Headliner
Roof moulding
Side air curtain module
Roof panel
Roof rear panel
Glass roof panel
Liftgate
The roof re
SEE MORE:
REMOVAL
NOTES:
Removal steps in this procedure may contain installation details.
RH illustration shown, LH is similar.
Refer to: Front Door Trim Panel (501-05 Interior Trim and
Ornamentation, Removal and Installation).
Torque: 2 Nm
INSTALLATION
To install, reverse the removal procedure.
Gen
NOTES:
Some variation in the illustrations may occur, but the essential
information is always correct.
Left illustration shown, Right is similar.
NOTE:
The fog lamp beam should be set at 2% below the horizontal
and parallel.
Check the fog lamp beam alignment.
Align the beam setting equipment to