Land Rover Discovery Owners & Service Manuals

Land Rover Discovery: Heated seats

Note: Heated seats consume a great amount of battery power. They will only operate when the engine is running.

If the Heated seat/s are operating when the ECO program is selected, the Heated seat/s will switch off automatically. The Heated seat/s can be switched on again, but this may affect the vehicle's fuel economy.

Front Heated Seats

Press the relevant Heated front seat button to switch the required Heater seat on at the maximum setting; the 3 LED indicators in the button illuminate.

Press a second time to set the Heated front seat at the medium setting; 2 LED indicators illuminate.

Press a third time to set the Heated front seat at the lowest setting; 1 LED indicator illuminates.

Press a fourth time to switch off.

Rear Heated Seats

If fitted, the Heated rear seats (nonclimate) are operated using the switches located on the rear of the centre console.

Press the relevant Heated rear seat button to switch the required Heated seat on at the maximum setting; the 3 LED indicators in the button illuminate.

Press a second time to set the Heated rear seat at the medium setting; 2 LED indicators illuminate.

Press a third time to set the Heated rear seat at the lowest setting; 1 LED indicator illuminates.

Press a fourth time to switch off.

CLIMATE SEATS

Note: The Climate seats will only operate when the engine is running.

If the Climate seat/s are operating when the ECO program is selected, the Climate seat/s will switch off automatically. The Climate seat/s can be switched on again, but this may affect the vehicle's fuel economy.

Press the relevant Climate front seat button to enable. A pop-up menu will appear on the Touch screen.

Heated ventilation

  • Touch the up arrow icon to switch heated ventilation on at the maximum setting (3 red bars).
  • Touch the down arrow icon once or twice to reduce the ventilation setting (2 and 1 red bars).
  • Touch the down arrow icon a third time to switch seat ventilation off.

Cooled ventilation

  • Touch the down arrow icon to switch cooled ventilation on at the maximum setting (3 blue bars).
  • Touch the up arrow icon once or twice to reduce the ventilation setting (2 and 1 blue bars).
  • Touch the up arrow icon a third time to switch seat ventilation off.

Seat zone selection

Constant selection of the Seat zone soft key will scroll through 3 choices of seat zone; full seat, cushion, or seatback only.

    READ NEXT:

     Timed climate

    The Timed climate system, when in operation, provides a comfortable temperature inside the cabin in advance of using the vehicle, or maintains a temperature when leaving the vehicle for a short period

     Timed climate remote controls

    The Timed climate remote control has an approximate range of 100 metres. There is no need to point the antenna at the vehicle. ON button. OFF button. LED (operation indicator). Antenna. Note:

     Storage compartments

    SEE MORE:

     Front end Sheet Metal Repairs Fender Apron Panel Front Reinforcement (G1775679) - Installation

    Installation Dress flanges where necessary. Using the old fender apron panel front reinforcement as a guide, drill holes in the new fender apron panel front reinforcement where the metal inert gas (MIG) plug welds are to be installed as indicated. Drill holes where the MIG plug welds

     Engine Emission Control - Ingenium i4 2.0l Diesel Low Pressure Exhaust Gas Recirculation Cooler (G1875912) / Removal and Installation

    PART(S) REMOVAL CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed. NOTES: Some variation in illustrations may occur, but the essential information is always correct. Some components shown remov

    © 2019-2024 Copyright www.lrdisc.com