Land Rover Discovery Owners & Service Manuals

Land Rover Discovery: Uni-body, Subframe and Mounting System Rear Subframe - FWD (G1799046)

Land Rover Discovery (2009–2016) Service Manual / Body / Frame and mounting / Uni-body, Subframe and Mounting System Rear Subframe - FWD (G1799046)

next pageUni-body, Subframe and Mounting System Rear Subframe - AWD (G1779461) - InstallationUni-body, Subframe and Mounting System Rear Subframe - FWD (G1799046) - Removalnext page

READ NEXT:

 Uni-body, Subframe and Mounting System Rear Subframe - FWD (G1799046) - Removal

PART(S) REMOVAL NOTES: Some variation in the illustrations may occur, but the essential information is always correct. Some components shown removed for clarity. Refer to: Electronic Parking Bra

 Uni-body, Subframe and Mounting System Rear Subframe - FWD (G1799046) - Installation

Installation Torque: 9 Nm CAUTIONS: Make sure that new nuts and bolts are installed. Nuts and bolts must be tightened with vehicle at normal ride height. Renew Part: Lower control arm nut a

 Uni-body, Subframe and Mounting System Rear Subframe Bushing (G1779466) / Removal and Installation

SPECIAL TOOL(S) REMOVAL NOTES: Some variation in the illustrations may occur, but the essential information is always correct. Some components shown removed for clarity. Refer to: Rear Subf

SEE MORE:

 Engine Emission Control - Ingenium i4 2.0l Diesel High Pressure Exhaust Gas Recirculation Valve (G1875913) / Removal and Installation

PART(S) REMOVAL NOTES: Removal steps in this procedure may contain installation details. Some components shown removed for clarity. Some variation in the illustrations may occur, but the essential information is always correct. Refer to: Low Pressure Exhaust Gas Recirculation Valve (303-08 E

 Engine Cooling - Ingenium i4 2.0l Diesel Cooling System Concentration Check (G2154751) / General Procedures

GENERAL EQUIPMENT Refractometer / Hydrometer CHECK CAUTIONS: The engine cooling system must be maintained with the correct concentration and type of anti-freeze solution to prevent corrosion and frost damage. Engine coolant will damage the paint finished surfaces. If spilt, immediately remove

© 2019-2025 Copyright www.lrdisc.com