Land Rover Discovery: Front Drive Halfshafts Front Right Halfshaft - FWD (G1794496)
READ NEXT:
SPECIAL TOOL(S)
PART(S)
Removal
CAUTIONS:
Do not use air tools to remove or install the halfshaft nut.
Failure to
follow this instruction may result in damage to the component
Do not allow
Installation
NOTE:
Only perform step 1 if the components were previously removed
CAUTIONS:
Make sure that the mating faces are clean and free of
corrosion and foreign material.
Make sure the seal
SEE MORE:
Nut - Rear attachment (2 off)
Bush
Ball joint
Bolt - Rear attachment (2 off)
Bolt - Air duct - Brake cooling attachment (if fitted)
Air duct - Brake cooling (if fitted)
Subframe
Bolt - Front attachment
Height sensor mounting
Bush
The lower control arm assembly consists of a pressed ste
Lower the vehicle.
Refer to: Engine Cover - INGENIUM I4 2.0L Diesel (501-05 Interior
Trim and Ornamentation, Removal and Installation).
Remove the bleed screw.
Remove the bleed screw.
Set the heater controls to maximum.
CAUTION:
Anti-freeze concentration must be maintained at 50%.
Fill the