Land Rover Discovery: External Controls
Land Rover Discovery (2009–2016) Service Manual / Powertrain / Automatic Transmission Transaxle / External Controls
READ NEXT:
External Controls
/ Description and Operation
COMPONENT LOCATION
Downshift paddle switch
Upshift paddle switch
Transmission Control Switch (TCS)
OVERVIEW
The external controls comprise a rotary TCS (transmission control switch)
and two ste
External Controls
/ Diagnosis and Testing
PRINCIPLES OF OPERATION
For a detailed description of the Automatic Transmission External Controls,
refer to the relevant Description and Operation section in the workshop
manual. REFER to: External C
Automatic Transmission Transaxle
/ Description and operation
COMPONENT LOCATION
Paddle switches - upshift / downshift
Transmission Control Switch (TCS)
Transmission Control Module (TCM)
ZF 9HP48 Automatic transmission
Automatic Transmission Fluid (ATF)
SEE MORE:
Engine Emission Control - Ingenium i4 2.0l Diesel High Pressure Exhaust Gas
Recirculation Valve (G1875913) / Removal and Installation
PART(S)
REMOVAL
NOTES:
Removal steps in this procedure may contain installation details.
Some components shown removed for clarity.
Some variation in the illustrations may occur, but the essential
information is always correct.
Refer to: Low Pressure Exhaust Gas Recirculation Valve (303-08
E
Rear direction indicator and reversing lamp bulb replacement
Replacing a rear direction indicator:
Remove the appropriate loadspace
vent door.
Rotate the rear lamp's retaining screw
counter-clockwise, until fully released
and then remove. This allows the rear
lamp unit to be withdrawn.
At the back of the rear lamp unit,
rotate the bulb holder count
© 2019-2026 Copyright www.lrdisc.com
